A summary of the problems encountered in daily life in the use of wire rings.

Wire rings exist almost everywhere in life. Wire rings are responsible for the important tasks of twisting and winding on the spinning machine. Improper use will affect the quality of the spun yarn. Our wire ring making machine suppliers will summarize the experience of using traveler based on practical experience.

Wire rings are the key equipment for spun yarns, which have a great impact on the quality of the product. It not only affects the hairiness of the finished yarn, but also has a certain impact on frequent yarn defects . The following is a simple summary of the problems that wire rings often encounter in daily use:

The main reason for hanging flowers in wire rings:

1. Raw material factors:

There are too many short piles in the raw materials, and there are many hairiness on the yarn. These short piles and hairiness will separate from the yarn when rubbing with the traveler and hang on the traveler, forming a phenomenon of traveler hanging.

2. Temperature and humidity factors:

The temperature and humidity in the workshop is not suitable or the air supply and exhaust organization is not good. The air flow is turbulent, especially when the humidity is too low, the fiber cohesion is poor and the short lint is easy to lose, which will easily cause the traveller to hang flowers; on the contrary, if the humidity is too high, the temperature is too high. High, the fiber is sticky, and it is easy to cause the traveler to hang flowers.

3. Mechanical state:

Such as many broken ends, poor adjustment of the cleaner, etc.

The main reason for the nep of the wire rings.

It is formed after the racetrack of the traveler crosses the yarn channel. This situation is more likely to occur when a traveler with a narrow passage is selected for coarse yarn.

The main reason for the burning phenomenon of wire rings.

1.The traveler is too heavy.

2. The spindle speed is too high or the spindle, ring and yarn guide are not concentric.

3. The quality of the ring traveler is not good, including the use of the ring overdue or unreasonable matching.

Finally, a good traveller must meet the following conditions:

1.The air circle is stable and the consistency is good.

2. The head is light and refreshing, and the air ring is full of elasticity.

3. Short maturity period, less fly circle and less decapitation.

4. Good hairiness.

5.The life cycle meets the standard.

The above is a summary of the problems encountered by the traveler manufacturing machine in our daily life. If you have other suggestions or want to choose a suitable wire ring making machine, you can contact us.