5 Tips To Extend Wire Ring Making Life span

Regular maintenance is one of the things that one must do to have a highly effective and proper functioning of a large machine.

These heavy machines are generally used in sectors such as the mining sector, agricultural sector, and industrial area.  Whenever these heavy machines are poorly cared for, they tend to work inefficiently and can breakdown if they persist.

The quality of the machine is an important factor to consider before the regular maintenance. Therefore there is a need to partner with a trusted and reliable wire ring making machine manufacturer.

The cost of repair is always expensive and so it is wise to adequately maintain these heavy machines regularly. Provided here are the five important tips for maintaining heavy machines.

1. Stay up to date in the training of operators

Most of the machines around generally have many operators. One of the important things relating to the maintenance of heavy machines is the right operation of the machine.

Immediately after the acquisition of a heavy machine, proper inspection should be carried out and a standard training on the operation of the machine carried out and then subsequently for refreshing purpose.

The manual for the modus operandi of the machine be rewritten in a language that can be comprehended by the operator and since most times there are changes of operators, it is wise that those on board be trained regularly to avoid breakdown of the machine.

2. Add and test lubricants frequently

The function of a lubricant is to create a condition of little or no friction around the parts of the machine that slides over each other. Proper and routine lubrication of the moving parts of the machine can increase the life span of the heavy machine and its components.

It is very important and hence should be checked regularly and in some cases, an analysis should be carried out on the used lubricating oil to know if there are contaminants from any part that is worn out or undergone tear. Again, a quality lubricant should be used to make the process effective and perfect. Different oil and grease are used for different components or parts of the heavy machine and they should be adhered to strictly.

3. Look out for signs of wear

The breakdown of a heavy machine sometimes does not result from a single cause; it might be a combination of one or two of the following:

I. Vibration resulting from the non-alignment of the gears and belt

II. Shock is sometimes caused by an ineffective operator method or as a result of an accident.

III. High temperatures resulting from usage of the heavy machine for a very long time, from friction, etc.

IV. The number of years spent can sometimes result in the wear of key parts of the machine. The age of a machine should be critically checked as many things can go wrong with the machine.

Whenever a worn part is detected, it should be replaced immediately so as not to have a ripple effect on other parts.

4. Maintain a neat environment and keep the machine clean

Wire ring making machines are usually equipped to filter all forms of air contaminants that may affect the functioning of the machine.

The filters should be regularly checked to be sure they are not damaged. If they are bad they should be replaced with a new one.

They should be stored in a covered area to prevent wind and rain that could cause rusting. When they are not used for sometimes it is ideal to run them intermittently.

5. Keep records of repair and maintenance

Among things that should be checked regularly are the brake fluids and other fluids available, electrical connections or components are checked regularly for preventive purposes.

In need of a high-quality wire ring making machine?

A well-planned and regular maintenance check on a heavy machine can translate into an optimum and efficient working of a wire ring-making machine.

However, the quality of the machine purchased from the manufacturer cannot be compromised. Hence, the need to partner with a trusted and reliable wire ring making machine manufacturer.

At Foshan Quanjiu Industry Automation Co., Ltd., we build and design high-quality wire making machines that are original and durable. We have a strong team who vast technologically and committed to delivering quality and high standard machines. Also, our delivery is timely and you can be sure to receive your orders at the agreed period. Kindly click to view the available quality products.